Littelfuse is giving power system engineers an easier path to faster, more compact designs with its new IXD704 Series of non-isolated, dual-channel, 4 A low-side MOSFET and IGBT gate drivers.

Serving as a direct upgrade to the company’s IXD604 family, the new lineup sharpens timing accuracy, introduces selectable under-voltage lockout (UVLO) protection, and shrinks the physical footprint, targeting everything from industrial motor controllers and switch-mode power supplies to Class-D amplifiers and medical electronics.
Solving Parallel Switching Headaches
In high-current systems where engineers parallel multiple MOSFETs or IGBTs, or tie outputs together, even tiny timing mismatches between driver channels can cause uneven current sharing and localized hot spots.
Littelfuse built the IXD704 specifically to keep those transitions in lockstep:
- Tighter Timing: Features a 2 ns typical propagation-delay matching between channels so paralleled switches fire predictably together.
- High-Speed Edges: Delivers a 9 ns typical rise time and 8 ns typical fall time to support higher switching frequencies in compact power stages.
- Built-In Noise Filtering: A 50 ns minimum input pulse-width filter screens out transient noise glitches before they can trigger an accidental turn-on.
- Zero Shoot-Through: Proprietary internal circuitry prevents the driver’s high-side and low-side output transistors from conducting simultaneously, eliminating cross-conduction, cutting wasted supply current, and keeping driver heat down.
Selectable UVLO and Rugged Protection
Unlike the earlier IXD604 generation, the IXD704 series adds fail-safe shutdown options to protect power stages during startup or brownout events.
Engineers can choose between two nominal UVLO thresholds – 12 V or a 9 V (“xA” variants), ensuring the driver shuts down cleanly if supply rails dip below safe operating limits.
On top of that, the output stage is virtually immune to latch-up, shrugging off reverse-bias current stress up to ±4 A.
Flexible Logic in a Smaller Footprint
Running off a +14 V to +35 V supply, the IXD704 provides 4 A peak sink/source current per channel (or 8 A when paralleled) across four logic configurations:
- Dual non-inverting
- Dual non-inverting with independent enable pins
- Dual inverting
- Mixed inverting/non-inverting
All four versions come in standard SOIC-8 and thermally enhanced 8-pin SOIC with exposed pad (SOIC_EP) packages. For space-constrained boards, the dual non-inverting variant with independent enable pins is also offered in an 8-pin DFN package with an exposed pad that cuts the footprint by 20 percent compared to the equivalent IXD604 DFN option.
Key Comment
“The new IXD704 Dual-Channel 4 A Low-Side MOSFET Gate Driver delivers optimized performance for modern MOSFET and IGBT applications,” said Hugo Guzman, Product Marketing Manager at Littelfuse. “It enhances the capabilities of the IXD604 series by introducing 2 ns typical propagation-delay matching, ensuring reliable operation when devices are paralleled or when outputs are tied together. With faster 9 ns typical rise time and 8 ns typical fall time, the IXD704 is well suited for high-frequency switching applications.”
Availability
The IXD704 series is available in standard 8-pin SOIC, thermally enhanced 8-pin SOIC (SOIC_EP), and 8-pin DFN (DFN_EP) packages in tape-and-reel format (2,000 per reel for SOIC packages; 5,000 per reel for the DFN package). Sample requests can be submitted through authorized Littelfuse distributors worldwide.
For a listing of Littelfuse distributors, please visit Littelfuse.com.
Additional information is available on the IXD704 Dual-Channel Low-Side Gate Driver product page.






