spot_img
spot_img

Trending

Smarter Motion Control in a 11.2 mm Footprint: Inside Murata’s New SCI36LT Intelligent IMUs

THE VOLT VOTES

Murata Manufacturing has introduced the SCI36LT Series, a new family of intelligent inertial measurement units (IMUs) that pairs high-performance 6-degree-of-freedom (6-DoF) MEMS sensing with an embedded microcontroller (MCU) inside a compact surface-mount package.

Murata SCI36LT Series, a new family of intelligent IMUs The Volt Post

At launch, the lineup features two distinct models. The SCI36LT-K01 comes loaded with Murata’s proprietary sensor fusion algorithm for out-of-the-box orientation sensing. The SCI36LT-K02, meanwhile, offers an open platform that lets engineers load and run their own custom software directly on the embedded MCU.

Both models pull heavy data processing off the main host system and handle it right at the sensor saving development time on the K01, and giving teams complete firmware control on the K02.

Standard IMUs only output raw angular rate and linear acceleration, leaving the host processor to do the heavy lifting of calculating orientation. Building that sensor fusion layer from scratch eats up computing overhead and demands deep specialization in algorithm design, calibration, and system tuning.

Drawing on its vertically integrated expertise in MEMS, electronics, and packaging, Murata solved this by combining the sensing element, MCU, supporting electronics, and passive components into a single platform. Moving the compute directly next to the sensor frees up host resources and gives system architects far more flexibility in how they handle inertial data.

Two Launch Variants: Turnkey or Custom

  • SCI36LT-K01 (Turnkey Solution): Pairs a ±490°/s gyroscope and a ±16 g accelerometer with Murata’s pre-loaded sensor fusion software. The onboard MCU calculates pitch, roll, and relative yaw, outputting orientation data in either Euler angle or direction cosine matrix (DCM) formats. Engineers can also fine-tune algorithm dynamics and output data rates to match specific motion profiles.

  • SCI36LT-K02 (Open Platform): Built on the exact same IMU and MCU hardware, but ships without Murata’s fusion algorithm. Instead, it gives developers direct access to program the embedded MCU themselves, making it easy to run proprietary, application-specific edge processing inside the sensor footprint.

For the K01, built-in calibration features also allow teams to run module-level compensation after the sensor is mounted to the PCB or end system.

That makes the SCI36LT family a strong fit for demanding robotics and heavy industrial applications from grade control on excavators and dynamic inclination sensing on construction gear, to RTK positioning support, humanoid robotics, and commercial drones working in agriculture, logistics, and civil infrastructure.

Compact, Industrial-Grade Integration

Measuring just 11.2 × 9.2 × 2.9 mm (0.44 × 0.36 × 0.11 inches), the SCI36LT packs its MEMS sensor, MCU, crystal resonator, and passives into a single LGA package. By minimizing the need for external components, it fits cleanly into tight board layouts.

It runs on a 3.1 V to 5.5 V supply and handles operating temperatures from -40°C to +85°C, making it tough enough for harsh industrial environments.

Leadership Comment

Murata SCI36LT Series, a new family of intelligent IMUs The Volt Post“As industrial and robotic motion-control systems grow more complex, engineers need more than just accurate inertial sensing, they need the flexibility to process data right at the edge,” said Juhani Pelttari, Senior Manager of Business Development at Murata Europe. “By bringing high-performance MEMS and embedded processing together in one compact footprint, the SCI36LT gives designers control over where and how that data is handled, cutting down integration effort across the board.”

This shared hardware architecture will also serve as the foundation for future models tailored to specific industry needs with custom calibrations and algorithms. Engineering samples of the SCI36LT-K01 and SCI36LT-K02 are available now, with mass production slated for Q1 2027.

For full specs and documentation, visit the Murata SCI36LT product page.

TVP BUREAU
TVP BUREAUhttps://thevoltpost.com
TVP Bureau is The Volt Post’s internal Editorial Team, dedicated to providing in-depth coverage of the Tech B2B ecosystem. The team is tasked with tracking the latest trends and developments across the tech industry, with a strong focus on emerging technologies and innovations. They are responsible for creating insightful editorial content, managing event coverage, and conducting research on new breakthroughs shaping the industry. TVP Bureau also plays a key role in ensuring that The Volt Post remains a trusted resource by staying ahead of the curve in reporting real-time news, views, and strategic industry insights

Don't Miss

Webinar Registration Jan 2025

This will close in 0 seconds

Webinar Registration Jan 2025 June 12

This will close in 0 seconds

This will close in 0 seconds