FPT Industrial, the Iveco Group’s powertrain brand, used Agrishow 2026 to reinforce its leadership in diesel and natural gas engines across Latin America while also expanding its focus on the broader agro-industrial sector.
The company showcased a well-rounded portfolio spanning on-road, off-road, and power-generation solutions tailored for agribusiness.
A key highlight was the introduction of new connectivity and predictive maintenance features in South America through the MyFPT app.
Designed to be simple and user-friendly, the app keeps customers continuously updated on engine health and performance. FPT also presented its REMAN line, completing its full-spectrum offering with sustainable remanufactured engines.
Natural gas takes center stage
Manufactured at FPT’s Córdoba plant in Argentina, the N67 NG and CURSOR 13 NG engines run on natural gas or biomethane, offering a compelling path toward energy independence—especially for sugar-energy operations.
Along with strong performance, they deliver lower CO? emissions, reduced fuel consumption, and lower maintenance costs.
The N67 NG is a 6.7-liter, six-cylinder engine producing 276 hp and 1,000 Nm of torque. Suitable for both on- and off-road use, it meets Euro VI standards and cuts CO? emissions by up to 10% compared to diesel equivalents.
The larger CURSOR 13 NG delivers 460 hp and 2,000 Nm of torque, making it ideal for long-haul transport. It uses a three-way catalyst system and, when powered by biomethane, can approach net-zero CO? emissions. With LNG tank capacity up to 900 liters, it can exceed a range of 1,500 km.
For lighter applications, the F1C natural gas engine offers a practical solution for agricultural daily use. This 3-liter unit delivers between 127 and 230 hp, with strong torque and low maintenance requirements, all while complying with Euro VI norms.
New power generation solutions
FPT also introduced the R24 and R38 engines for stationary and industrial applications like power generation and irrigation pumps. Both models are designed for reliability, efficiency, and ease of maintenance, with single-side servicing to minimize downtime.
The compact R24 (2.45 liters) delivers 26–46 kVA and supports both 50 and 60 Hz operations.
The R38 (3.8 liters) offers higher output, reaching up to 72 kVA in G-Drive configuration. Both engines integrate cooling and filtration systems to simplify daily operations.
Remanufactured engines gain traction
FPT’s Original REMAN range highlights a strong push toward sustainability without compromising performance.
These remanufactured engines offer lower total cost of ownership, quicker availability, and reduced environmental impact compared to new builds.
At the event, FPT showcased the CURSOR 9 REMAN engine, widely used in agriculture and construction, alongside the CURSOR 11 REMAN designed for sugarcane harvesters. Both come with the same warranty as new engines, reinforcing confidence in the remanufacturing process.
Ethanol innovation for Brazil
FPT is also investing in ethanol-powered solutions, particularly for Brazil’s energy landscape. Two prototypes, the N67 Ethanol and CURSOR 13 Ethanol were displayed at the Case IH stand.
The N67 Ethanol engine delivers high power density and efficient combustion, leveraging Otto-cycle technology to reduce noise and emissions.
The CURSOR 13 Ethanol, fully developed in Brazil, offers high performance, low fuel consumption, and fast response, all while meeting stringent environmental standards without EGR.
N67: built for versatility
Part of the NEF series, the N67 engine continues to stand out for its flexibility and performance.
With over two million units produced since 2001, it powers a wide range of agricultural equipment from tractors to harvesters.
Available in both mechanical and electronic versions, the N67 delivers 130 to 312 hp and can be adapted for multiple applications, including on-road, off-road, and stationary use.
MyFPT: smarter engine management
The MyFPT app brings digital connectivity directly to users, offering easy access to engine data, manuals, spare parts, and service locations.
By simply entering the engine serial number, users can retrieve key information instantly.
Paired with the FPT Dongle via Bluetooth, the app enables real-time monitoring of engine performance, fault detection, and proactive maintenance support. This helps operators optimize uptime and respond quickly to potential issues.
N67 Natural Gas – Technical Specifications
Displacement [liters]: 6.7 liters
Cylinder arrangement: inline 6
MPI (Multipoint Injection)
Power [kW @rpm]: 206 kW (276 hp) @ 2000 rpm
Torque [Nm @ rpm]: 1000 [Nm] @ 1000 rpm
ATS: 3-way catalyst
Emissions standard: Euro VI
Full specifications available on the FPT website.
CURSOR 13 Natural Gas – Technical Specifications
Displacement [liters]: 12.9 liters
Cylinder arrangement: inline 6
MPI (Multipoint Injection)
Power [kW @rpm]: 338 kW (460 hp) @ 1900 rpm
Torque [Nm @ rpm]: 2000 [Nm] @ 1100 rpm
ATS: 3-way catalyst
Emissions standard: Euro VI
Full specifications available on the FPT website.
F1C – Technical specifications
Displacement [liters]: 3 liters
Cylinder arrangement: inline 4
ECR Electronic Common Rail
Power [kW @rpm]: 95 – 152 kW
Torque [Nm @ rpm]: 300 – 470 [Nm]
ATS: EGR+DOC+SCRoF+SCR+CUC
Emissions standard: Euro VI Step E
Full specifications available on the FPT website.
R24 – Technical specifications
Displacement [liters]: 2.4 liters
Cylinder arrangement: inline 4
Standby Power: 20 – 33 kWe @ 60Hz
Prime Power: 20 – 30 kWe @ 60Hz
Emissions: Unregulated / Stage 3A
Full specifications available on the FPT website.
R38 – Technical specifications
Displacement [liters]: 3.8 liters
Cylinder arrangement: inline 4
Standby Power: 46 – 56 kWe @ 60Hz
Prime Power: 41 – 50 kWe @ 60Hz
Emissions: Unregulated
Leadership Comment
“Agrishow 2026 is a strategic networking and business platform. For this reason, we are taking this opportunity to strengthen our commitment to customers in the development of powertrain solutions oriented towards the agribusiness efficiency,” said Bernardo Brandão, President of FPT Latin America. “Our strategy focuses on offering solutions that can increase the efficiency and profitability of operations, while also contributing to the energy transition. We are constantly investing in a diversified portfolio of engines that guarantee energy independence, cost reductions, and high reliability, supporting sustainable agribusiness growth.”
To Know More: CLICK HERE
