i-Chips has rolled out the new iEB-KXU2 is a 4K 60Hz input/output FPGA development board.
The new input/output FPGA development board by i-Chips targets the development of real-time image processing circuits. The image input and output of the FPGA development board interface is HDMI 2.0.
Easy-to-handle LVDS is used for image input and output of the i-Chips FPGA. By using the included register compiler* and register access tool (WREG2400.exe) in i-Chips input/output FPGA development board one can focus on the original development without worrying about developing and debugging peripheral circuits.
*The register compiler is a tool that generates FPGA internal control registers and SPI I/F from a definition table.
Image Input/Output Interface
|
? | HDMI2.0 (up to 4K60Hz) x 4?Non HDCP? |
|
? | HDMI2.0 (up to 4K60Hz) x 4?Non HDCP? |
i-Chips Control Interface
|
? | Controlled by SPI from PC via USB (Type-C or Mini-B) ,or controlled by SPI from an on-board microcontroller (LPC1769: Main control) ,which is switched by a DIPSW. |
|
? | Download mcs etc. from a PC to the SPI Flash via USB(Micro-B). |
|
? | Controlled by I2C from the on-board microcontroller(LPC1769: HDMI control only). |
i-Chips On-board Devices
|
? | AMD Kintex UltraScale XCKU115-2FLVA1517E Image I/F of FPGA and HDMI Tx/Rx are all LVDS I/F. |
|
? | Micron DDR4 x16bit x4pcs up to 2400Mbps |
|
? | Micron 512Mbit Quad SPI 1.8V motion x1pcs Infineon 512Mbit Quad SPI 3.3V motion x1pcs Micron 1Gbit Quad SPI 3.3V motion x1pcs (for configuration) |
|
? | NXP LPC1769 x1pcs Control by SPI I/F with outside of the board is possible with D-sub(RS-232C). |
|
? | NXP LPC1769 x1pcs?Control by I2C |
|
? | ITE IT68052(HDMI2.0 Rx to LVDS) x 4pcs(Non HDCP) |
|
? | ITE IT6264 (LVDS to HDMI2.0 Tx) x 4pcs(Non HDCP) |
|
? | FTDI FT2232H (USB to SPI/I2C/UART converter) |
|
? | TI CDCE949(Connect user clock 4-port with FPGA and control by I2C) |
Features of i-Chips Input/output FPGA development board
- External PC control (via USB) or, built-in microcontroller control can be selected by DIPSW switching.
- In case of control from external PC, use software program WREG2400.exe.
- Register level programming possible.
Power Supply
- ?12V?4A max?
Board Size
- 250mm x 250mm
Software Program
- WREG2400
(register setting program)
For Further Info: CLICK HERE
